|
Thread Number: 92278
/ Tag: Vintage Automatic Washers
Kenmore dryer help! |
[Down to Last] |  |
|
| Post# 1168670 , Reply# 1 1/8/2023 at 08:04 (474 days old) by Repairguy (Danbury, Texas) | ||
 | ||
Post# 1168689 , Reply# 2 1/8/2023 at 10:36 (473 days old) by aircub  (Huntington, AR) |
||
|
Model Here is the model number!
View Full Size
| ||
| Post# 1168693 , Reply# 3 1/8/2023 at 11:28 (473 days old) by Repairguy (Danbury, Texas) | ||
|
| ||
|
Post# 1168701 , Reply# 4 1/8/2023 at 12:34 (473 days old) by goatfarmer (South Bend, home of Champions) |
||
 | ||
|
Post# 1168808 , Reply# 5 1/9/2023 at 00:10 (473 days old) by aircub (Huntington, AR) |
||
|
Thermostat I check and the high limit switch has continuity and I checked the other thermostats too they are ok. What do I check next ? | ||
| Post# 1168816 , Reply# 6 1/9/2023 at 02:07 (473 days old) by Maytag85 (Sean A806) | ||
 | ||
| Post# 1168832 , Reply# 7 1/9/2023 at 08:14 (473 days old) by Repairguy (Danbury, Texas) | ||
|
| ||
|
Post# 1168868 , Reply# 8 1/9/2023 at 10:00 (472 days old) by aircub (Huntington, AR) |
||
|
Startup No there is no snap after you hit start! | ||
| Post# 1168889 , Reply# 9 1/9/2023 at 11:47 (472 days old) by Repairguy (Danbury, Texas) | ||
|
| ||
|
Post# 1168965 , Reply# 10 1/9/2023 at 23:24 (472 days old) by aircub (Huntington, AR) |
||
|
Yeah! That did the trick I was a loose terminal and slipped off the post !
View Full Size
| ||
|
Post# 1168967 , Reply# 11 1/9/2023 at 23:25 (472 days old) by aircub (Huntington, AR) |
||
|
!!!!!! Thank you all for your patience and assistance yiyr the best! | ||
| Post# 1169001 , Reply# 12 1/10/2023 at 07:51 (472 days old) by Repairguy (Danbury, Texas) | ||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
