|
Thread Number: 92470
/ Tag: Vintage Automatic Washers
How hard is it to replace a noisy Maytag tub bearing? |
[Down to Last] |  |
| Post# 1170938 2/2/2023 at 09:25 (457 days old) by WoodJack99 (Massachusetts/Virginia, USA) | ||
When one of my machines spins, it sounds like a freight train and I'm told that's probably due to the bearings. My local Maytag guy thinks it's "too old," but I absolutely refuse to get rid of it no matter what happens. How complicated would it be to do myself or have someone handy who I know do it?
| ||
|
| Post# 1170944 , Reply# 1 2/2/2023 at 10:06 (457 days old) by qsd-dan (West) | ||
 | ||
| Post# 1171020 , Reply# 2 2/2/2023 at 18:37 (456 days old) by norgeway (mocksville n c ) | ||
|
EASY! Lay it down, take off the belts turn the center unit off it unscrews pull out the old bearing put in a new one screw the brake back on put on the belts..your done. | ||
| Post# 1171025 , Reply# 3 2/2/2023 at 20:03 (456 days old) by qsd-dan (West) | ||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
