|
Thread Number: 93278
/ Tag: Vintage Automatic Washers
HELP my thor is broken |
[Down to Last] |  |
|
Post# 1179525 , Reply# 1 5/1/2023 at 11:34 (366 days old) by Unimatic1140  (Minneapolis) |
||
 | ||
|
Post# 1179572 , Reply# 2 5/1/2023 at 20:38 (365 days old) by Adam-aussie-vac (Canberra ACT) |
||
|
I’ll try to lie it on its side and get some photos underneath, And the entire transmission is there at least it looks like it This post was last edited 05/02/2023 at 00:57 | ||
|
Post# 1179574 , Reply# 3 5/1/2023 at 21:05 (365 days old) by luxflairguy (Wilmington NC) |
||
|
Poor baby! You get what yo pay for! | ||
|
Post# 1179595 , Reply# 5 5/2/2023 at 01:03 (365 days old) by Adam-aussie-vac (Canberra ACT) |
||
|
UniMatic I wasn’t able to get a photo but I ended up trying to actually get a video and so the physical top of the transmission appears to be intact and so it may only just be that gear and a bit of broken metal CLICK HERE TO GO TO Adam-aussie-vac's LINK | ||
|
Post# 1179612 , Reply# 6 5/2/2023 at 13:39 (365 days old) by Unimatic1140 (Minneapolis) |
||
|
Okay so those gears appear to be part of the shifting mechanism between agitate, spin and both agitate/spin for washing dishes. My Thor is completely different in the shifting design.
I'd take the outer tub off so you can get a better look at the entire mechanism and see what happens when you turn the motor pulley by hand. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}