Thread Number: 93731  /  Tag: Wanted to Buy Items
Help!
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1183786   6/29/2023 at 23:06 (303 days old) by jil1000 (Northern CA )        

jil1000's profile picture
How do I get my front cover back on? It was protruding slightly and I tried to adjust, then the other side fell. Can’t see any screws that go in anywhere, only at the bottom.

  Photos...       <              >      Photo 1 of 3         View Full Size



Post# 1184028 , Reply# 1   7/2/2023 at 21:33 (301 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Attaching a Kitchenaid lower access panel

combo52's profile picture
Two sheet metal screws hold this panel in place they go through the flange at the bottom of the panel into the black steel frame of the dishwasher.

You push the tow panel up behind the brackets while holding it in place and then install the two screws.

John.


Post# 1184066 , Reply# 2   7/3/2023 at 17:24 (300 days old) by jil1000 (Northern CA )        
Have the screws…

jil1000's profile picture
Having a hard time finding the flange 😅 I do however know where the screws go. I have one side in, the other is popped out. 😞 Should I share a picture?

Post# 1184086 , Reply# 3   7/3/2023 at 19:13 (300 days old) by RP2813 (Sannazay)        

rp2813's profile picture

Those lower panels can be exasperating to install.  My experience has been to keep trying and eventually it pops into place when you least expect it.


Post# 1184171 , Reply# 4   7/4/2023 at 18:18 (299 days old) by jil1000 (Northern CA )        
Exasperated

jil1000's profile picture
Haha yes they are. The one side that started it all popped back in and now the other side is popped out- go figure. It might be staying like that until my new unused KDS 18 arrives next week. 🙈

Post# 1184464 , Reply# 5   7/8/2023 at 21:46 (295 days old) by pdub (Portland, Oregon)        
Maybe this will help...

pdub's profile picture
I responded on your other post but you might have missed it.

  View Full Size
Post# 1184483 , Reply# 6   7/9/2023 at 01:06 (294 days old) by jil1000 (Northern CA )        
@PDub

jil1000's profile picture
THANK YOU SO MUCH!! I didn’t see this, I really appreciate it!


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy