|
Thread Number: 94249
/ Tag: Classified Ad Finds
Maytag elec. dryer |
[Down to Last] |  |
Post# 1189377 9/5/2023 at 13:53 (236 days old) by goatfarmer  (South Bend, home of Champions) |
||
| ||
|
| Post# 1189378 , Reply# 1 9/5/2023 at 14:49 (236 days old) by Maytag85 (Sean A806) | ||
 | ||
|
Post# 1189391 , Reply# 2 9/5/2023 at 17:18 (236 days old) by goatfarmer (South Bend, home of Champions) |
||
|
tag sez 606
View Full Size
| ||
| Post# 1189393 , Reply# 3 9/5/2023 at 17:23 (236 days old) by Maytag85 (Sean A806) | ||
|
| ||
|
Post# 1189395 , Reply# 4 9/5/2023 at 18:18 (236 days old) by LowEfficiency (Iowa) |
||
 | ||
|
Post# 1189461 , Reply# 5 9/6/2023 at 16:03 (235 days old) by maranoman (Des Moines, Iowa) |
||
It's Mine - and I Hate to Sell it
Long story on this one. I bought a A906/DE906 pair from another collector a couple of weeks ago. The dryer's cabinet was a bit beat up for such a rare machine. However, I had a DE806 in a mint white cabinet that I thought would make a good donor. The only time a 806 can be a donor is when a 906 is in the room, right?
I had also just picked up a free avocado DE606 with a mint cabinet a few weeks earlier. I converted it to a DE306 because its electronic control was on the fritz. I tried for weeks to sell the converted DE306 but apparently nobody wants avocado around here. So I decided to make the DE806 into an avocado machine so I could use its cabinet on the 906. So what you see there is a Frankentag machine comprised of a DE906 cabinet, a DE606 shell, and a DE306 control panel. Unfortunately, I couldn't find any DE306 tags, so I put a spare 606 tag on it. I know it doesn't show in the ad, but I did quite a bit of paint touch up on the front and side panels. Hope that makes sense and nobody thinks that what I did was sacrilegious... | ||
|
Post# 1189482 , Reply# 6 9/6/2023 at 18:58 (235 days old) by goatfarmer (South Bend, home of Champions) |
||
|
| ||
| Post# 1189487 , Reply# 7 9/6/2023 at 19:19 (235 days old) by qsd-dan (West) | ||
 Hope that makes sense and nobody thinks that what I did was sacrilegious...
Not at all. I saved a DE808 that seriously abused inside and out. It's now a conglomeration of 3 different SOH dryers, one from the late 70's and the other 2 from the 80's. It looks and runs like a million bucks now but still a fully functional DE808. This post was last edited 09/06/2023 at 20:17 | ||
|
Post# 1189501 , Reply# 8 9/6/2023 at 22:05 (235 days old) by maranoman (Des Moines, Iowa) |
||
|
This post has been removed by the member who posted it. | ||
|
Post# 1189502 , Reply# 9 9/6/2023 at 22:11 (235 days old) by maranoman (Des Moines, Iowa) |
||
|
Photos of DE906 and "KDE806" Thanks @goatfarmer and @qds-dan for your support on my decision to swap cabinets. I'm all for keeping a machine original, but when I can improve its looks without spending time, effort and money to paint entire cabinets and touch up porcelain chips, it just makes sense.
Below are the final outcomes of the other two machines: the DE906 (with a DE806 cabinet) and the KDE806 with a KDE606 cabinet.
Next up is the A906 which will need a new front panel at a minimum (due to misplaced appliance cart damage in its past - see last photo.)
Sorry about the low quality of the photos - they were high quality when I uploaded them to the post but the website is changing them for some reason. | ||
| Post# 1189504 , Reply# 10 9/6/2023 at 22:23 (234 days old) by Repairguy (Danbury, Texas) | ||
 | ||
| Post# 1189516 , Reply# 11 9/7/2023 at 02:44 (234 days old) by qsd-dan (West) | ||
|
| ||
|
Post# 1189592 , Reply# 12 9/8/2023 at 06:59 (233 days old) by Sudsomatic (Indiana) |
||
Kudos
Excellent Jeff, not just for the awesome detailing on the machines, but for the ad you placed. If more people were that thorough on sites like FB Marketplace older appliances might have more of a chance to go to more people (other than just collectors) as a usable daily driver instead of eventually being junked when their low effort listing doesn't spark interest.
So many ads are just one blurry picture and 10 words of text at best.
I would like to swap my Maytag combo cabinets for Harvest Gold one day, in a similar vein of keeping it original instead of painting. | ||
| Post# 1189886 , Reply# 13 9/12/2023 at 22:34 (228 days old) by jil1000 (Northern CA ) | ||
That 906.. | ||
| Post# 1189975 , Reply# 14 9/13/2023 at 21:59 (228 days old) by Hippiedoll ( arizona ) | ||
WOOOOO HOOOOOO!  | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}