My Miele washer W3035 got a fault error (F52, I believe). I had it checked out by local authorized repair provider and as it turns out, it needs a new motor to the sum of $900. Have decided not to repair it, but it's been sitting there. It's a waste to just have it sent to the junk yard since I know you can get more life out of it. I'm just not willing to pay for the expensive repair since I will be moving out of my roommates home into my own where I already have a Miele Washer and Dryer.
What would your recommendation be?
Adrian
Post# 1191854 , Reply# 1   10/13/2023 at 08:26 (197 days old) by henene4(Heidenheim a.d. Brenz (Germany))  
F52 dosen't ring a bell to me, F53 would be a tacho issue with a brushed motor.
The W3035 uses a brushless motor.
Very unlikely the motor actually is the issue.
These motors do apparently use a tacho generator according to Mieles parts diagramm - very much more likely it's just the tacho generator becoming loose or such.
But since you already condemned it - your question is what to do with a broken washing machine?
Scrap it?
Put it on a sales site free for pick-up?
Should be pretty obvious what to do with a broken appliance you don't intend on fixing...
Post# 1192019 , Reply# 2   10/16/2023 at 03:10 (194 days old) by richnz(New Zealand)