|
Thread Number: 94599
/ Tag: Vintage Automatic Washers
DE808 Felt seal and Bulkhead |
[Down to Last] |  |
Post# 1192553 10/25/2023 at 20:21 (191 days old) by rodknock95  (Salem, Missouri) |
||
|
You can see where one roller was spinning the shaft and caused wear. I think it will be okay, but wanted to get your opinions. The new felt seal for these do not have the lighter side like the book says, lol. | ||
|
| Post# 1192555 , Reply# 1 10/25/2023 at 20:39 (191 days old) by Maytag85 (Sean A806) | ||
That felt seal looks similar to the one I installed on my Maytag DG606 back in the spring of 2019. Wouldn’t be surprised if Maytag just ended up using those felt seals on the SOH dryers despite them being completely different from the HOH’s. Probably re-used them since that’s what was in the parts bin so to speak.
| ||
|
Post# 1192556 , Reply# 2 10/25/2023 at 22:14 (191 days old) by rodknock95 (Salem, Missouri) |
||
|
too short or not I was scared they would be too short after hearing how members were running into that. | ||
|
Post# 1192662 , Reply# 3 10/28/2023 at 11:18 (188 days old) by rodknock95 (Salem, Missouri) |
||
|
Drum Rollers The book says to lube these roller shafts on the rear bulkhead with s.b.l. oil. 55975 I think, but I cannot find a aftertaste, anywhere of what that is. LoL | ||
|
Post# 1192687 , Reply# 4 10/28/2023 at 20:37 (188 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
Lubricating, drum rollers | ||
|
Post# 1192736 , Reply# 5 10/29/2023 at 16:43 (187 days old) by jeff_adelphi (Adelphi, Maryland, USA) |
||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}