Thread Number: 95084
/ Tag: Modern Automatic Washers
hey guys |
[Down to Last] |
Post# 1197332   1/17/2024 at 17:46 by dominic20 (Souix falls)   |   | |
Checkrate/Likes
 
2    
|
|
Post# 1197341 , Reply# 1   1/17/2024 at 20:08 by luxflairguy (Wilmington NC)   |   | |
Checkrate/Likes
 
2    
Dominic! Anything for sale on AW should be listed in Shoppers Square! Thanks! |
Post# 1197342 , Reply# 2   1/17/2024 at 20:43 by RP2813 (Sannazay)   |   | |
Checkrate/Likes
 
2    
|
Post# 1197343 , Reply# 3   1/17/2024 at 21:03 by Maytag85 (Sean A806)   |   | |
Checkrate/Likes
 
     
|
Post# 1197364 , Reply# 4   1/18/2024 at 13:07 by dominic20 (Souix falls)   |   | |
Checkrate/Likes
 
     
|
Post# 1197365 , Reply# 5   1/18/2024 at 13:25 by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
2    
|
Post# 1197372 , Reply# 6   1/18/2024 at 16:37 by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
4    
Also, keep in mind there’s very little demand for them you’ll need to include prices and pictures and how much it’s going to cost to ship, direct drive agitators like most agitators do not wear out often so they’re kind of a dime a dozen, so you may not be able to sell them.
We have boxes and boxes of agitators never really figured out what to do with them. I do like to keep a few spares around because we occasionally need one for a machine where restoring sometimes you have to break an agitator out if it seized in place. |
Post# 1197373 , Reply# 7   1/18/2024 at 16:50 by qsd-dan (West)   |   | |
Checkrate/Likes
 
1    
|
Post# 1197375 , Reply# 8   1/18/2024 at 17:42 by Maytag85 (Sean A806)   |   | |
Checkrate/Likes
 
     
John, this may be slightly off the tracks, but do you happen to have the timer for my Whirlpool in your parts stash? I remember you mentioned you more than likely had the timer in a thread I created last summer. Been meaning to ask about it but don’t want to pester you about it since you can be quite busy at times. Not in a huge rush, but hope to get that much up and running once again.
|
Post# 1197495 , Reply# 9   1/20/2024 at 16:46 by dominic20 (Souix falls)   |   | |
Checkrate/Likes
 
1    
i will be happy to take some agitators off your hands. I collect agitators, especially old ones. Maytag 85, I have a Whirlpool timer. What model whirlpool washer do you have, and what year is it?
I really want the white whirlpool surgealator and the Montgomery ward agitator. I can tell you the story of why through my email. Does anybody want a coin-op Maytag agitator small black three-hole angle fin? |
Post# 1197575 , Reply# 10   1/21/2024 at 09:30 by dominic20 (Souix falls)   |   | |
Checkrate/Likes
 
     
Here is my story about the Montgomery ward. back when I was 8 years old, i found one at a junkyard upside down I could not tip it on its side also could not remove the agitator i wanted it so bad. also at the same junkyard i found a late 60s whirlpool and got the agitator from that one being someone before me removed the cap. a couple of months later, someone threw my surgealator into a pine tree and never got it back. I do happen to have a fabric softener dispenser for the belt drive whirlpool. could you help me, please????
ill take all or some of your agitators. just not duplicates. combo52 im going to send you a email. |