Thread Number: 95377
/ Tag: Modern Automatic Washers
the Haier problems |
[Down to Last] |
Post# 1200359   2/27/2024 at 19:45 by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
well
Haier XQG50-31 the dispenser flushes the bleach side in the 2nd 3rd and 4th rinse portions of the cycle guess that is normal the water fill valves are slow to fill until hot water is run thru them also they sometimes do not close even with no power to the washer and the dryer part blows the safety fuse but do not use that as it uses loads of water Haier XQG50-qf802 the fill to dispenser hoses cannot be tied up as it causes the fabric softener to dispense too soon comment if you want me to post the rest of the video links here CLICK HERE TO GO TO bpetersxx's LINK |
|
Post# 1200363 , Reply# 1   2/27/2024 at 20:05 by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
2    
|
Post# 1200400 , Reply# 2   2/28/2024 at 07:08 by gizmo (Victoria, Australia)   |   | |
Checkrate/Likes
 
3    
This is typical of valves where the rubber diaphragm is getting old and less flexible. The hot water softens them temporarily. Time for new water valves. |
Post# 1200557 , Reply# 3   3/1/2024 at 12:36 by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
pressure is fine at the faucet
oh boy well time to hunt for new valves CLICK HERE TO GO TO bpetersxx's LINK |
Post# 1202158 , Reply# 4   3/23/2024 at 12:31 by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1203869 , Reply# 5   4/21/2024 at 06:28 by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|