|
Thread Number: 95587
/ Tag: Vintage Dishwashers
help with kds-18 motor mount please! |
[Down to Last] |  |
|
| Post# 1202448 , Reply# 1 3/29/2024 at 15:08 by rollermatic (cincinnati) | ||
|
anyone out there have any info please? | ||
Post# 1202453 , Reply# 2 3/29/2024 at 16:27 by steved  (Guilderland, New York) |
||
|
Sorry Pete It's been so long since I removed a KD-18 motor that I can't picture how. The service manual doesn't give much help in way of reassembly directions either. I imagine someone will chime in sooner or later. | ||
| Post# 1202456 , Reply# 3 3/29/2024 at 17:43 by qsd-dan (West) | ||
 | ||
| Post# 1202458 , Reply# 4 3/29/2024 at 18:23 by qsd-dan (West) | ||
|
Here's a shot from the following thread (Reply #15). Hopefully the picture is clear enough:
www.automaticwasher.org/c... Another shot: www.automaticwasher.org/c...
View Full Size
| ||
|
Post# 1202462 , Reply# 5 3/29/2024 at 21:05 by combo52 (50 Year Repair Tech Beltsville,Md) |
||
Installing pump and motor retaining clips
On KitchenAid KD 18 through 22 dishwashers
Hi Peter, you can probably see in the picture that Dan posted in reply number four how it goes in you lift up the curved handle you hook the tightly bent part of the bracket over the knobb on the top of the motor with the rubber against the porcelain tub And then you push down the curved handle and pushes against the top of the motor which puts downward tension on the motor, pulling it in a downward direction. John | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}